DeWalt DCT419S1 Manual de uso y cuidado Pagina 17

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 76
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 16
15
English
SCANNING TOO SLOW
If the scanning speed is below the minimum processing speed of the
hand-held wall scanner, the following error message will appear:
Remove the hand-held wall scanner from the wall.
When the "Begin Scanning" screen appears on the display, place the
hand-held wall scanner on the wall to restart the scan.
BATTERY LOW
If the 12V Max* battery pack is about to run out of charge, the following
error message will appear:
Replace or recharge the 12V Max* battery pack.
LOST CONTACT WITH THE WALL SURFACE
If the hand-held wall scanner loses contact with the wall surface, the
following error message will appear:
Remove the hand-held wall scanner from the wall.
When the "Begin Scanning" screen appears on the display, place the
hand-held wall scanner on the wall to restart the scan.
MAXIMUM DISTANCE EXCEEDED
The hand-held wall scanner has a maximum scanning range of 9.8feet
(3meters). During pre-scan mapping, if the distance scanned exceeds
the maximum distance, the following error message will appear:
Remove the hand-held wall scanner from the wall.
When the "Begin Scanning" screen appears on the display, place the
hand-held wall scanner on the wall to restart the scan.
Vista de pagina 16
1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 75 76

Comentarios a estos manuales

Sin comentarios